Amphenol Authorized Distributor for Korea
ADMTEC is the authorized Amphenol distributor for Korea, supplying the full Amphenol lineup — Aerospace, Socapex, Air LB, RF, PCD, Industrial, CIT, Sensors and more — into the Korean market. (excluding Positronic)
About
About Amphenol
Amphenol is one of the largest connector and interconnect system manufacturers in the world. Founded in the United States in 1932, it designs and manufactures connectors, interconnect systems, antennas, sensors, and specialty cable, and is an S&P 500 company listed on the NYSE under the ticker APH.
In military and aerospace connectors, Amphenol is a principal manufacturer of MIL-Spec standard connectors including MIL-DTL-38999, which are used across defense, aviation, and space systems.
Amphenol operates as a group of divisions — Amphenol Aerospace for military and aerospace circular connectors, Amphenol Socapex for European defense standards, Amphenol Air LB for wiring interconnect systems, Amphenol RF for coaxial products, and others, each holding its own specialist lineup.
- Founded
- 1932
- HQ
- Wallingford, Connecticut, USA
- Listed
- NYSE: APH · S&P 500
- Business
- Connectors · interconnect · sensors · cable
- Markets
- Military · Aerospace · Industrial and more
- Korean Distributor
- ADMTEC
Lineup
Amphenol product lines
These are the Amphenol product lines ADMTEC supplies into Korea. If you are not sure which line a P/N belongs to, send it as it is and we will identify it for you.
MIL-DTL-38999 circular connectors
MIL-DTL-38999 · D38999 · TV0x
The military and aerospace standard circular connector. It is the reference specification for space and defense interconnect across aircraft, missiles, and ground equipment. Series III (Tri-Start), Series I and II (JT/LJT).
View details →VPX backplane connectors
VITA 46 · R-VPX
High-speed board-to-board interconnect meeting the VITA 46 specification. We supply the connectors together with guide modules and guide pins, and ADMTEC holds this line in Korean stock.
View details →Low Mating Force rectangular connectors
MIL-DTL-55302 · M55302 · B³ brush contact
Rectangular board-level connectors that join board to board and wire to board. Contacts sit on a .100 inch square grid in 2, 3 or 4 rows, and we will identify the part from either the military number (M55302) or the commercial one (MB · DB · I/O · PC).
View details →MIL-DTL-5015 Circular Connectors
MIL-DTL-5015 · MS3102 · MS3106 · VG95234
Threaded circular connectors that carry signal and high-current power in one shell. The solder series and the rear release crimp Matrix series intermate, and European drawings calling out VG95234 are covered as well.
View details →PCB contacts
PCB tail contacts for D38999 · pin / socket
A termination that solders directly to the board instead of crimping the connector rear to wire. Contacts are ordered as a separate item from the connector, and we carry contact sizes 22D, 20, and 16 in both pin and socket. These are not AS39029 listed items, so we confirm your procurement requirement first.
View details →Micro-D connectors
MIL-DTL-83513 · M83513
Micro-miniature rectangular connectors on .050 inch contact spacing. Solder cup, crimp wire, and PCB terminations are specified by slash sheet, and we also supply EMI backshells and accessories.
View details →2M micro connectors
2M801 · 2M803 · 2M804 · 2M805
Amphenol's micro-miniature circular connector family. The final digits indicate the coupling type — 2M801 ACME thread, 2M803 bayonet, 2M804 push-pull, 2M805 Tri-Start. Backshells and shrink boot accessories are supplied alongside.
View details →Backshells · connector accessories
M85049 · 2M shrink boots
Parts that attach to the connector rear to seal the cable and terminate the shield, including shrink boots. They are ordered as a separate item from the connector. ADMTEC holds these in Korean stock.
View details →MIL-C-26482 miniature circular connectors
MIL-C-26482 · MS3110 · MS3112 · MS3116
Miniature circular connectors that hold twice the contacts in half the standard size. PT bayonet and PC threaded coupling, with hermetic and breakaway options.
View details →MIL-C-83723 Series III circular connectors
MIL-C-83723 · M83723
Medium-size environment-resistant circular connectors. Three coupling types — bayonet, threaded, and quick disconnect — with rear-release crimp contacts.
View details →RF coaxial connectors
MIL-C-39012 · M39012 · UG
High-frequency interconnect for radar, communication, instrumentation, and electronic warfare systems. We carry more than 60 series including SMA, TNC, N-Type, and BNC, and we can match the M39012 and UG military numbers on your drawing to the corresponding P/N.
View details →ALL PARTS
Everything except Positronic
Beyond the lines above we also supply D-Sub (MIL-DTL-24308), RF coaxial, junction modules and terminal blocks, relay sockets, heavy duty power connectors, wire and cable assemblies, sensors, VG95319 circular connectors (TV · CTV), and RJ Field Ethernet connectors. Send us a P/N and we will identify the division and get back to you.
View details →Positronic is outside ADMTEC's scope of supply and is not distributed by us. Every other Amphenol division lineup is available through the authorized channel.
Why ADMTEC
Why ADMTEC × Amphenol
- Authorized distributorAmphenol authorized distributor for Korea. Authorized distribution channel, with 100% of product sourced through the manufacturer. View the certificate →
- Korean stockMajor P/Ns held in Korean stock. Items in stock ship quickly; other items are supplied within the manufacturer lead time.
- Certificate of ConformanceA C of C is issued with every order, covering traceability, lot number, quantity, and inspection records.
- Defense procurementWe work with Korean government and prime contractor procurement processes.
- Engineering supportSpecification matching, replacement of discontinued (EOL) parts, drawing review, and compatible alternate matching.
- One channel for every divisionQuotation, ordering, and delivery management through a single ADMTEC channel regardless of which division a part comes from. Send us the P/N and we start by identifying the division.
Q&A
Frequently asked questions
What is Amphenol?
Amphenol is one of the largest connector and interconnect system manufacturers in the world, founded in the United States in 1932. It is an S&P 500 company listed on the NYSE under the ticker APH, and manufactures interconnect components for military, aerospace, industrial, and communication markets.
Who is the Amphenol authorized distributor in Korea?
ADMTEC is an authorized Amphenol distributor for Korea. We supply the full Amphenol division lineup (excluding Positronic) into the Korean market, and issue a Certificate of Conformance (C of C) with every order.
Which Amphenol divisions do you supply?
Amphenol Aerospace, Socapex, Air LB, RF, PCD, Industrial, CIT, Sensors, CDI and the other divisions (excluding Positronic). You do not need to know the division — send us the P/N and we identify it and proceed with the quote.
Can you supply Positronic products?
Positronic is outside ADMTEC's scope of supply, so we do not distribute it. Every other Amphenol division lineup is available through the authorized channel.
Does Amphenol make MIL-DTL-38999 connectors?
Yes. Amphenol Aerospace and Amphenol Socapex are both principal manufacturers of MIL-DTL-38999 standard circular connectors. Send a D38999 family P/N with your quote request and we will confirm stock and lead time.
How is the Certificate of Conformance (C of C) issued?
ADMTEC issues a C of C with every order. It is a formal document covering source traceability, lot number, quantity, and inspection records, and it meets the standard requirements of defense and aerospace procurement processes.
Can discontinued (EOL) Amphenol parts be replaced?
Yes. Through manufacturer EOL monitoring and stock networks we provide last-time-buy guidance at the point of EOL notice, and match compatible replacement P/Ns. We review this together with your technical inquiry.
How do I request a quote for Amphenol parts?
Send us a P/N and quantity and we reply with a quotation within 48 business hours. Even without an exact P/N we can work through part selection based on specification (voltage, current, materials, environmental rating, and so on). Quotes and technical inquiries go through the quote page.
Amphenol parts — talk to ADMTEC
Authorized supply chain · Korean stock · Certificate of Conformance. From quotation through engineering support in one channel.